SYSTEMATIC HEAT DISINFECTION TECHNIQUE

MORE

MILLIIN SYSTEMATIC HEAT DISINFECTION TECHNIQUE

  • The conventional heat disinfection system in the market is only semi-heat technique, that means the fluid distribution loop in the dialysis center is of heat disinfection, but the RO membrane is still disinfected by chemical, such as peracetic acid, the risk of residual chemical to the patient safety is not eliminated.

    Milliin's systematic heat disinfection technique is a comprehensive and advanced disinfection method, offering a wide range of heat covering, from RO membrane to distribution loop. It lays down the foundation for the clinic to adopt highest frequent water system disinfection to maintain the microorganism and endotoxin within the limitations according to strict dialysis fluid standard (YY0572-2015). Furthermore, only through systematic heat technique can prevent the formation of biofilm, which is considered as an invisible killer to worsen the dialysis fluid quality.

  • Meanwhile, Milliin systematic heat disinfection also adopt the patent heating technique: electromagnetic heating, with the advantages of higher heating and disinfection efficiency and safety compare to conventional invasive resistance-heated technique.

ELECTROMAGNETIC HEATING
(PATENT TECHNIQUE)

MORE

ELECTROMAGNETIC HEATING (PATENT TECHNIQUE)

  • The conventional principle for water system heating disinfection is invasive resistance-heated technique, the disadvantage for this technique is low transformation rate from electrical energy to heat energy (only 30%), so the electrical energy consumption is relative high.
  • Milliin’s patent electromagnetic heating technique is free of water tank, eliminate the risk in conventional invasive resistance-heated technique with higher transformation rate from electrical to heat energy (90%), it’s a unique heating technique with high efficiency and safety.

AUTO-BALANCE
(PATENT TECHNIQUE)

MORE

AUTO-BALANCE (PATENT TECHNIQUE)

  • Unstable raw water supply is common which is needed to be avoided in dialysis center to maintain the treatment consistency for the patient. Especially in winter, the volume of production water will be decrease by 3% when the temperature of raw water lowered every 1℃ ,which will has a negative impact on treatment adoption ;On the contrary, the volume of production water will be increased when the temperature of raw water elevate, what a waste of water resource!
  • Secondary, the performance of RO membrane will be gradually reduced as time goes on, as a consequence, the production water rate will decrease. So, how to maintain the capability of RO membrane and extend the lifespan of RO membrane is the key challenge to water system manufacture.
  • Milliin patent Auto-Balance is a unique technique to maintain stable production water volume through multi-point pressure and flow rate monitoring and control in various raw water conditions, and also this technique will keep the RO membrane within its best performance as long as possible and extend the operation life span of RO membrane.

PURE WATER MAINTENANCE

MORE

PURE WATER MAINTENANCE

  • The RO membrane raw water side is of high concentration of microorganism and other substance which could be good nutrition to the growth of bacteria, as a consequence, the RO membrane raw water surface can grow biofilm easily, further to worsen the microorganism quality of production water.

    Meanwhile, the membrane raw water surface can form CaCO3,CaSO4,MgCO3 deposit, which could block the membrane to decrease the production water volume.

  • Milliin pure water maintenance program could address this challenge through pure water dwelling in raw water side when water system is in standby mode. Meanwhile, the latest pureflush technique could achieve cycle high flow raw water side flushing in every 2 hours.

ALL-ROUND DEAD AREA ELIMINATION TECHNIQUE

MORE

ALL-ROUND DEAD AREA ELIMINATION TECHNIQUE

  • U-type dead area free pipeline
  • Compare to conventional T-type pipeline, U-type could assure the fluid under flow status through treatment time and assure the lowest flow rate which could eliminate bacteria growth, to prevent the formation of biofilm.
  • Free RO membrane/membrane container
  • Sophisticated manufacture technology